规格书

STRONG BASE INVESTMENT LTD.

Unit 17, 11/F., Hewlett Centre, 52-54 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong. Tel: (852) 2793 3293 Fax: (852) 2793 3096

1. Package Dimension: 1.1 TYPE NO.： SONY PART NO. 1-802-374- 1.2 STRUCTURE DIMENSION 18-1.0Strong Base TYPE NO. F9-4090AHG1-12-1 Display 12H COLOR GREEN R1.58-2.130.91PIN189.62.54*17=43.18+0.58-010°A-A1.6+0.50-022.8610.57724.835.51215FILM SLIPOUTMAX 0.5A-A4:13.57.71052.612.32685.62171.8TOLLERANOER0.52(0,1)±0.1(1,4)±0.2(4,10)±0.3(10,+ )±0.582.54±0.1UNIT:mm*-***-***-**F9-4090AHG1-12-1****-**-**F9-4090AHG1-12-1123456789101.F-Clock Led Display2.9-REF'S No.3.4-44.09-0.9\"Clock Led Display5.0-Empolder Sequence Number6.A-Anode7.HG-High Greed8.1-Electrocircuit Number9.12:12H 10.-1:much less one point*-***-***-**F9-4090AHG1-12-1****-**-**SONY Part No.Strong Base Product No.Product Date TITLE/DESCRIPTION: 0.9” Clock LED Display PART NO.: F9-4090AHG1-12-1 PAGE：P1-2/9

STRONG BASE INVESTMENT LTD.

Unit 17, 11/F., Hewlett Centre, 52-54 Hoi Yuen Road, Tong, Kowloon, Hong Kong. Tel: (852) 2793 3293 Fax: (852) 2793 3096

1.3 INTERNAL CIRCUIT DIAGRAM DISPLAY 12H DSTAMPMA2F2B1C1E2D2G2UCF3B2C2LCE3A3G3F4B3C33DE4A4G4B4I1C4D4I31516DSTAMPMB1C1A2B2C2D2E2F2G2UCLCA3B3C3D3E3F3G3A4B4C4D4E4F4G4I1I3123456147891112131718 TITLE/DESCRIPTION: 0.9” Clock LED Display PART NO.: F9-4090AHG1-12-1 PAGE：P1-3/9

STRONG BASE INVESTMENT LTD.

Unit 17, 11/F., Hewlett Centre, 52-54 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong. Tel: (852) 2793 3293 Fax: (852) 2793 3096

14 Summary of Inner Structure Material: 2791845610*-***-***-**3F9-4090AHG1-**-1****-**-**

No. 1 2 3 4 Parts Name （部品名） REF TAPE PWB DICE Q′TY (数量) 1 1 1 30 (12H) Material （材质） ABS（PA-757） L226（ED-175GY） KB-1150 GaAsP（TK-108YGM） 84-1A Fabricant （处理） Au plate 0.3um more 5 Ag Epoxy 30(12H) 6 7 8 9 10 AL Wire 30(12H) AL RSP-200BD 84-ELMISR4SS PRC 458 I101BK Insulated Adhesive Silicone Adhesive Printing Ink STAMP INK TITLE/DESCRIPTION: 0.9” Clock LED Display PART NO.: F9-4090AHG1-12-1 PAGE：P1-4/9

STRONG BASE INVESTMENT LTD.

Unit 17, 11/F., Hewlett Centre, 52-54 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong. Tel: (852) 2793 3293 Fax: (852) 2793 3096

2. Specifications: 2.1 ELECTRICAL/OPTICAL CHARACTERISTICS AT Ta=25℃ PARAMETER(any Dot) Average Luminous Intensity Dominate Wavelength Spectral line Half-width Forward Voltage any Dot Reverse Current Dot- Luminous Tolerance 2.2 ABSOLUTE MAXIMEM RATINGS AT Ta=25℃ PARAMETER(any Dot) Power Dissipation any seg Peak Forward Current any seg (I/10Duty Cycle0.1ms Pulse Width) Continuous Forward any sey Derating Linear Form25℃ any seg Reverse Voltage any seg Operating Temperature Range Storage Temperature Range SYMBOL PAD IPF IAF VR TOPR TSTG GREEN 75 100 25 5 -25℃TO+75℃ -25℃TO+75℃ UNIT mW mA mA V SYMBOL 1GREEN MIN 800 2.0 TYP 860 571 30 2.3 MAX 960 2.5 10 1:1.3 UNIT ucd nm nm v uA TEST CONDITION IF=10mA IF=20mA IF=20mA IF=10mA VR=3V IF=10mA Iv λD △λ VF I R Iv-m 23Solder Temperature1/16inch Blow seating plane for 3 Seconds at 260℃ TITLE/DESCRIPTION: 0.9”Clock LED Display PART NO.: F9-4090AHG1-12-1 PAGE：P1-5/9

STRONG BASE INVESTMENT LTD.

Unit 17, 11/F., Hewlett Centre, 52-54 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong. Tel: (852) 2793 3293 Fax: (852) 2793 3096

3. Endurance characteristics: Lowering brightness ratio shall guarantee each specification and 80% or more of the lowest limit of its specification. Items Conditions The temperature of soldering tin is:245±3℃; Solder wetting time shall be 3s or less. Specifications Anew uniform coating of solder shall cover a minimum of 95% of the surface being immersed 1 Solderability Resistance 2 to soldering heat Soldering ironmethod: Bit temperature:380±10℃ Application time of soldering iron: 3+10 s However, excessive pressure shall not be applied to terminal. For other procedures, refer to IEC Pub.68-2-20. At non-operated condition. Only endurance conditions by a frequency sweep shall be made. The entire range from 10Hz to 55Hz and return There shall be no damage ori appearance. Electrical characteristics and Mechanical character is-tics shall be satisfied. Lowering of brightness shall be within 20% There shall be no damage to the function of display such as shorts. component fall off, cracks of leakage. 3 Vibration to 10Hz shall be transversed in 1 min. Amolitude 1.5 mm This motion shall be applied for period of 2h each of 3 mutually perpendicular axis(a total of 6h) At non-operated conditions Peak acceleration :981m/s2 4 Shock Duration of pulse:6ms Three successive shocks shall be applied in both directions of 3 muturally perpendicular axis(a total of 18 shocks) At non-operated conditions, the vacuum fluorescent display shall be subjected to 10 successive change of temperature cycles. each as shown in table below . Then it shall be subjected to standard atmosphereic conditions for 1 h . after which measurement shall be made . ※ lowering of brightness shall be within 50% There shall be no damage to the function Of display such as disconnection, shorts, 5 Change of temperature Temperature65±3℃Duration30min5min30min5min component fall of; cracks or leakage. 234Standard atmospheric condition-25±2℃Standard atmospheric condition TITLE/DESCRIPTION: 0.9” Clock LED Display PART NO.: F9-4090AHG1-12-1 PAGE：P1-6/9

STRONG BASE INVESTMENT LTD.

Unit 17, 11/F., Hewlett Centre, 52-54 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong. Tel: (852) 2793 3293 Fax: (852) 2793 3096

At non-operated conditions the vacuum fluorescent display shall There shall be no damage to be stored at a temperature of 40±2℃ with relative humidity of the function of display such 6 Damp heat 90% to 95% for 96h, then it shall be subjected to standard as disconnection . Shorts. atmosphere conditions for 1 h . after which measurement shall be Component fall off, cracks or made . 7 Life leakage All segment shall be operated for 1000 h continuously at a rated ※ Lowering of brightness voltage. Shall be within 40%. ※ Lowering of brightness shall be within Storage at 8 low temperature At non-operated condition. the vacuum fluorescent display shall be stored at a temperature of -35±5℃ for 96 h then it shall be subjected to standard atmospheric conditions for 1 h . after which measurement shall be made . 20%..there shall be no damage to the function of display such as shorts. Component fall off. cracks or leakage. ※ Lowering of brightness Storage at 9 high temperature At non-operated condition. the vacuum fluorescent display shall be shall be within 50% stored at a temperature of 65±5℃ for 96 h then it shall be There shall be no damage subjected to standard atmospheric conditions for 1h . after which measurement shall be made . All segment shall be operated as a temperature of (A)℃ for 96 h then it shall be subjected to standard atmospheric conditions for 1h .after which measurement shall be made. to the function of display such as shorts . component fall off. Cracks or leakage. ※Lowering of brightness shall be within 30%. there shall be n0 damage to the function of display. shall be within 50%. there shall be no damage to the function of display. ※ Reference Valuing 16.9g Operating at 10 low temperature Storage at 11 high temperature Mass (A): -40±5 ℃ then it shall be subjected to standard atmospheric conditions for 1h .after which measurement shall be made. All segment shall be operated as a temperature of(A) ℃ for 96 h ※Lowering of brightness (A): +85±5 ℃ 12 4.APPEARANCE Outside Remarks: 1. Printing Clear and No vague, 1 NO deform, NO miss print and so no defect description. 2. Unit intact and NO morph,No break and so on defect description APPEARANCE The Loudspeaker Shall be placed 40W to 80W light lamp. hen Visual inspection shall be Made a distance of 30 centineter. TITLE/DESCRIPTION: 0.9” Clock LED Display PART NO.: F9-4090AHG1-12-1 PAGE：P1-7/9

STRONG BASE INVESTMENT LTD.

Unit 17, 11/F., Hewlett Centre, 52-54 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong. Tel: (852) 2793 3293 Fax: (852) 2793 3096

5.Packing diagram： 5.1 Foam box Size Chart： ①:Product ②: line ③: Foam box ③: plastic bag 5.2 Box diagram： ttention: 1. Foam box:380*220*48mm. 2. Cardboard box size:390*255*380mm. 3. 60PCS In A Per box(600PCS/Carton). TITLE/DESCRIPTION: 0.9” Clock LED Display PART NO.: F9-4090AHG1-12-1 PAGE：P1-8/9

STRONG BASE INVESTMENT LTD.

Unit 17, 11/F., Hewlett Centre, 52-54 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong. Tel: (852) 2793 3293 Fax: (852) 2793 3096

6.Notice On Materials And Manufacturing Process Don’t Change written Contents And Append Them 1. This Part Should Not Contain And Substances Which Are Specified In SS-00259-1* 2. Clarify By Delivery Specifications About the Existence Of Use Of The Substance Which Are Specified In SS-00259-1* 3. In Order To Make Sorting Of Plastic Waste Easy ,Easy, Material Symbols Is Marked On The Plastic Part ,For Details On Marking Symbols Refer To SS-00195-1“Marking Of Plastic Parts And Packaging Material”, Marking May Be Omitted In The Following Cases: Not Enough Space To Apply The Marking Material Would Interfere With Performance Or Functional Requlrements Marking technically Not Feasible Due To The Specific Production Method ※ SS-00259-1:Management Standards For The Restrictively-Used Substances Included In Parts And Devices . Remark: If The Supplier Dose Not Yet Have A Copy Of SS-00195-1 And 00259-1, The Local Purchasing Department Will Provide It TITLE/DESCRIPTION: 0.9” Clock LED Display PART NO.: F9-4090AHG1-12-1 PAGE：P1-9/9